870 supper express extractors?
Printed From: The BaitShop
Category: FireArms, et cetera
Forum Name: Shotguns, Shotgun Ammunition and Shotshell Reloading
Forum Description: Scattergun afficionados meet here!
URL: http://www.baitshopboyz.com/forum_posts.asp?TID=23998
Printed Date: 26 March 2026 at 19:55
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 870 supper express extractors?
Posted By: d4570
Subject: 870 supper express extractors?
Date Posted: 19 December 2013 at 05:52
|
870 super express extractors, are they a hard replacement? I'm having a little trouble pulling my 3 1/2 spent hulls out of the chamber. 'Course they never stick till the geese are landing in your face and you'd love to fire all three shells.  It just seams to be my 3 1/2 " goose loads. All the other reloads run like silk with only a very few hanging up.  ------------- Remember: Four boxes keep us free ,the soap box, the ballot box, the jury box, AND the cartridge box |
Replies:
Posted By: BEAR
Date Posted: 19 December 2013 at 06:50
|
It has been a while since I replaced an extractor on an 870 (not a super express). The extractor is held in place by a spring/plunger. If you use a small screwdriver to pry back the plunger toward the bear of the bolt body(compressing the spring) then the extractor will come out IF you rotate the tip of it across the bolt face (from the 9 oclock position to the 3 oclock position as viewed by the front of the bolt). IIRC the extractor Hope this helps, your super express might be different? |