![]() |
Thank you, from the BaitShop Boyz! |
Another cable snap. |
Post Reply
|
| Author | |
deaddog
Administrator
*AKA The Flying Gun* Joined: 23 April 2004 Location: Svalbard Status: Offline Points: 991201 |
Post Options
Thanks(0)
Quote Reply
Topic: Another cable snap.Posted: 11 September 2006 at 05:41 |
|
I feel like I know my firearms pretty well but bows are still a mystery to me. I took my Browning bow in for a preseason check-up about a month ago. I've had three cable-string failures in the last two years and I didn't want it to happen again. If you've never had this happen to you it is something you can live without. Many of us have drug a fairly dull razor across our cheeks at 3 miles per hour and have come out of it with a nasty razor burn. A cable snap is a bit more violent. A string with the potential energy available to launch a 450 grain arrow at nearly 300 fps explodes across your face. So after three of these the first one bad enough to make me buy a new bow, my new one with two previous snaps came out of it's check-up with a clean bill of health. Less than 100 shots later it blows up on me again (#4). I took it back to the archery shop and he can't figure out what's causing all of this distruction. Just wondering if any of you have had a reoccuring problem like this? It's gonna take awhile to get rid of my new flinch and deer season is less than 2 weeks away. DD |
|
|
Endeavor to persevere.
|
|
![]() |
|
waksupi
.416 Rigby
aka Keeper of the Old Traditions Joined: 11 June 2003 Status: Offline Points: 2371 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 September 2006 at 12:35 |
|
Never had that problem, with my long bow or recurve!
|
|
|
Shooters Cast Bullet Alumnus
http://www.castboolits.gunloads.com/index.php? |
|
![]() |
|
Guests
Guest
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 September 2006 at 03:49 |
|
I have compounds and compound crossbow (carring more pressure). Never had a problem. I've got to believe that it is really a limb problem, with either the cam or the limb out of alignment. I might try writting the manufacture and push for a solution. they may just replace the bow to avoid future liability!!! Curious, was the shop that replaced the cables a licensed distributor of your bows manufacture? was a factory cable installed? Where in the cable is it snapping? at the crimp-on connector? If you didn't buy the bow new it is possible that a "kitchen mechanic" changed the cable to change the draw length and put the wrong cable on it. You changes would have bee with an archery shop that would have matched the length to the cable that broke, could be perpetuating the wrong cable problem? I've got bows 30+ years old that are on the original cable, no problems. Just some thoughts. BEAR |
|
![]() |
|
deaddog
Administrator
*AKA The Flying Gun* Joined: 23 April 2004 Location: Svalbard Status: Offline Points: 991201 |
Post Options
Thanks(0)
Quote Reply
Posted: 14 September 2006 at 05:45 |
|
I'm going to go pick it up again today. I'll investigate what they did and how they did it. I talked to the archery shop today and he said he test fired it with no problems. I might have to sart wearing a helmet when I shot that thing.
DD |
|
|
Endeavor to persevere.
|
|
![]() |
|
SteelyEyes
.375 Holland & Holland Magnum
Joined: 21 July 2003 Location: United States Status: Offline Points: 879 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 October 2006 at 16:50 |
|
I'd just buy another bow by another manufacturer and then maybe see about dealing with that bow and the people that made it.
|
|
![]() |
|
deaddog
Administrator
*AKA The Flying Gun* Joined: 23 April 2004 Location: Svalbard Status: Offline Points: 991201 |
Post Options
Thanks(0)
Quote Reply
Posted: 09 October 2006 at 00:11 |
|
I did about a week ago. I traded some Contender barrels and parts for a Mathews MQ 32. It's about 5-6 years old but still in good shape with new factory replaced limbs. My new problem is getting it tuned, It has a longer draw than what I like and I'm afraid I'll have to buy a new cam. I hit OK with it but the arrows don't seem to spin enough. DD |
|
|
Endeavor to persevere.
|
|
![]() |
|
Guests
Guest
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 October 2006 at 04:32 |
|
Good luck. I'd HIGHLY recommend a booklet by Larry Wise "Tuning your compound bow". I bought a copy about 12 years ago but it is invaluable to get the job done right. Especially with all the bad luck you have had. I'm sure you know the "spin" is controlled by the pitch on the arrows (fletching/feathers/vanes). I still shoot some feathers with my long bows and recurves. but the plastic vanes are really better (less drag and more durable. Sometimes a "bigger "vane will give you more drag and stabilize quicker that a thin/small vane. While it is not recommended many compounds can be fitted with a slightly (1 inch) different string to adjust the draw to you specifically. With all the problems you have had, I'd have the dealer do ALL the setup on yoour new bow. Let us know how it is working. Got my first archery deer of the season on Friday evening. One down, four to go. BEAR |
|
![]() |
|
deaddog
Administrator
*AKA The Flying Gun* Joined: 23 April 2004 Location: Svalbard Status: Offline Points: 991201 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 October 2006 at 13:12 |
|
I might try that shorter string trick. I'm using the same arrows that I used with my Browning and never had any flight problems with them and that bow. The Mathews shoots em like a knucke ball. DD |
|
|
Endeavor to persevere.
|
|
![]() |
|
Post Reply
|
|
|
Tweet
|
| Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |