Hi Korey - Was checking my old loading log...... I was loading for my Colt Delta 10mm in 1991 when I finally was able to get a set of dies...the brass came from once fired factory. I remember I had to get the factory ammo outta "Kesslerings" gun shop in Washington state! Anyway for a bit of history:
1991 loads for 10mm:
175gr Lead SWC, 5.0 gr Win 252AA powder, CCI 300 primer, 900 fps [5" barrel]
180gr Lead SWC, 6.0 gr Unique, CCI 300 primer, 950 fps [5" barrel]
These loads worked so well I stuck with them having lots of above powder. They don't make Win 252AA anymore! There wasn't much for load data back then either. The powder charges are light cause I was using all lead bullets [with no gas checks].
1995 loads for .40 S&W:
175gr lead SWC 4.5 gr Bullseye, CCI 500 primer, 900 fps in Glock Model 22.
175 gr lead SWC 4.2 Win 231, CCI 500 primer, 825 fps in Glock Model 22.
180 gr FMJ/TC 4.9 Bullseye, CCI 500 primer, 950 fps in Glock Model 22.
Anyway, there's probably lots better bullet/powder combos today.....
S&W Model 1066 stainless 10mm.
Regards, Marcus.
Edited by North Logan