#11524554 - 10/23/16 Cerakote and pitting. Joined: Mar 2010 ... Is there a treatment to fill the pits that will withstand the temps involved in the curing process? .... Devcon steel or titanium epoxy should work well if you have any laying around.
Apr 15, 2007 - Usually the surrounding metal is sanded down to blend the pits rather than making an attempt at filling. Temp required to actually fill them will ...
Jun 6, 2016 - 4 posts - 3 authors
... it at home, but I was wondering if a simple cerakote might smooth. ... round of sandblasting to remove the existing finish and get to bare metal.Web results
Filling rust pitting? — gunsandammo
https://forums.gunsandammo.com › Main Category › General Firearms
Jan 5, 2013 - 16 posts - 9 authors
Is there a way to fill some rust pitting on the exterior of a receiver? ... kind of "usedDec 1, 2015 - Was wondering what would be best to fill minor pitting. Would JB Weld ... I do not think J-B weld and paint is "restoring". What are you trying to ... Lauer Duracoat sell a special defect filler that should work. Most epoxies like JB ... The sprayed metal is molten in an arc and fills in the rust pores. The metal is ...
Nov 11, 2017
Feb 6, 2008
Jul 20, 2011
Sep 11, 2017
Jul 3, 2011 - 2 posts - 2 authors
I began to prepare the slide by "sanding" it, using 000 steel wool, and ... HoweverJun 25, 2012 - 13 posts
OK, so many thanks for your input on my "cerakote or duracoat" thread, ... Also, can I fill some of these pits with marine-tex and sand that out ...Engraving will show through, and all but the lightest of etching will be seen. Rust pits will show, as willany machine marks. For best results the metal should be ...
May 10, 2007 - 10 posts - 6 authors
My question is this: is they a process to fill these so I can blue the bbl? .... the pits, sanded the action back to bare metal, and applied Duracoat ...